TechBite: How’s Your Hard Drive Doing?


By Steve Bass

Hard drives are about as dependable as a teenager promising to come home by midnight. The more you know about your drive–the brand-specific idiosyncrasies and the diagnostic sounds that drives produce–the better prepared you are for the inevitable crash.

Hard Drive Inspector is a handy tool to monitor your drives for spin rate, seek time, and almost 20 other potential problem spots. The program also supplies specs–including drive model, firmware version, and serial number, all perfect when calling for warranty support.

The drive’s temperature is displayed in the system tray; if the drive gets too toasty (I have mine set for 120 degrees Fahrenheit), you can get an e-mail alert, or better, automatically put the computer in Standby mode. You can view a summary health report that’s enough for most of us; the S.M.A.R.T. report has the details. Hard Drive Inspector costs $30, but you can download a 15-day trial version to give you a feel for the tool; the trial is fully functional, though limited to one drive. Nonetheless, it’ll tell you everything you’ll need to know about your drive.

Note: At press time (an antiquated phrase if I ever heard one), the Hard Drive Inspector’s site is temporarily down. You can read about the product by looking at a Google cache.

It’s not as comprehensive as Hard Drive Inspector, but if you’d prefer a freebie (of course you would!), download CrystalDiskInfo.

Read the rest

TechBite’s columnist Steve Bass and PC World Contributing Editor publishes a free weekly newsletter with commentary on the technology products he loves, the strategies for getting the most out of them,and the gotchas that can cause computing misery. Sign up for the newsletter here

 1,081 total views,  1 views today

(Visited 1 times, 1 visits today)

3 thoughts on “TechBite: How’s Your Hard Drive Doing?”

  1. Hello,

    I have a Dell XPS 720. It has an nVidia 280 GTX graphics card and 8 GB of RAM. My computer enters Power Save Mode spontaneously – 11 times yesterday! – and it’s driving me nuts! Dell does not seem to know what the problem is although it was suggested that there might be a conflict between the GPU and RAM(?).

    I have a Windows Vista Ultimate as an OS. Lucky me! (Dell’s idea, by the way.)

    Any thoughts?

    Best wishes,


    P.S. I have PC Pitstop Optimizer 3

  2. Darryl Gittins

    Thanks Steve!
    PCPitstop’s overdrive test is also a pretty good indicator of pending drive failure. It will provide s report about the disk IO measured in MB/sec. A healthy drive should be running at about 20 MB/sec or higher. Anything as low as 15 or less is a good sign of a drive that may either soon fail, or that is running so slow that it is likely impacting system performance, and perhaps even causing errors.

    The overdrive test is a good place to start when troubleshooting system problems, or just for setting a baseline on which you can later gauge the health of the system.

Leave a Comment

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.